Description
This is a full coverage kit. Depending on snow and weather conditions you can omit the top right side above pipe. Comes with a skid out of the same material to protect snow from entering from the bottom. Photos are of the jacket on a 2024 TX300 with the stock gas tank.
With this kit you will want to start with the lower radiator shroud bolt on the right side, slide the jackets under the radiator shroud and line up the pre-cut hole by tugging on the jacket to line the holes up, then get the 8mm bolts started by hand. Then start placing zip ties through gromets around the frame for the other pieces. Work your way down and around and do not tighten the zip ties until placement is correct. The bottom has holes that will line up with holes on the side panels, so 1 zip tie will be used to secure both locations.
The front topmost grommet on the lower right panel can be secured to the coolant line.